Rapid Mill™ Composite Plugs
Description:
The RAPID MILL™ is a mostly composite Frac Plug used to isolate hydrocarbon formations for multi-stage frac operations. The slim lightweight design makes deployment fast and efficient. Because of it's very low metallic content, the Rapid Mill™ can be quickly and easily milled and circulated back to surface using conventional milling, drilling with a rig and tubing, or with coiled tubing.
Features:
  • No tungsten carbide buttons, and no aluminum!
  • Can be deployed on wireline, coiled tubing, tubing or drill pipe
  • Designed for horizontal or vertical wells
  • All RAPID MILL™ PLUGS can be equipped with a Pump Down Kit.
  • Dependable cast iron slips secure plug in place
  • Unique pump down element design requires less fluid and pump pressure to deploy plug horizontally
  • Consistent drill times of 30 minutes or less
  • Positive lock-up design to ensure lockup of multiple plugs in a single wellbore
  • Custom O.D. available upon request
Additional Resources

PDF/Tech Sheet

Patent #: 6,796,376
Specifications: (Inches & Fahrenheit)

PART NUMBER

CASING
O.D.

CASING
WEIGHT

O.D

Length

Temp & PSI

Recommended
Setting
Tool

05.RBDA.400.319G 4" 9.50-11.00 3.190" 24.0" 250°/8K Baker #10 or GO
05.RBDA.412.360G 4-½" 9.50-15.10 3.600" 24.0" Baker #10 or GO
05.RBDA.500.392G 5" 11.50-18.00 3.920" 24.0" Baker #10 or GO
05.RBDA.512.430G 5-½" 15.50-23.00 4.300" 24.0" Baker #20 or GO