The Mill E-Z™ Mechanical Set Cement Retainer utilizes a built-in sliding sleeve assembly for remedial cementing or zone abandonment. ’s low metallic content, the Mill E-Z™ Wireline Cement Retainer can be quickly and easily milled and circulated back to surface using conventional milling, drilling with a rig and tubing, or with coiled tubing.

• Consistent drill times of 30 minutes or less
• Can be set on wireline or coiled tubing using conventional setting tools
• Can be milled or drilled with coiled tubing or a rig
• Positive seal after setting
• Millable cast iron slips
• High differential pressure rating
• Low temp and high temp materials conducive to a wide range of environments
• Patented precision shearing device
• Mill E-Z™ is set via a universal setting sleeve and adapter.
• Simple valve control by surface pressure manipulation
  
  

Once the Magnum Mill-EZ™ Composite Cement Retainer is set mechanically, an acceptable workstring weight is then set on the retainer for a more secure fit. During the cementing operation, the hydraulic forces will add or subtract weight to the cement retainer. The operator should complete the hydraulic calculations to prevent overloading or pumping out of the retainer. Now the cementing process can begin.