The Magnumdisk™ Go-Devil is dropped at surface to break the ceramic disk in the Single and Dual Magnumdisk™ to communicate the annulus below the tubing, casing or packer with the production tubing. The Magnumdisk™ Go-Devil is made of millable brass so as not to inhibit any remedial milling operation in the future. The Magnumdisk™ Go-Devil has a fishing neck if it becomes necessary to fish the Go-Devil due to debris accumulation on the ceramic disk.

• Standard fishing neck
• Brass construction
• 1” OD on standard Magnumdisk™; applications
• Allows for safe rupturing of Magnumdisk™ with high differential
• May be run in any environment and depth
• Go-Devil may be lubricated in the top of the tree and dropped by opening the tree valve
• Length of bar can vary upon depth of Magnumdisk™
• Full opening of Magnumdisk™on Single or Dual Magnumdisk™
• Pointed impact point for more efficient rupturing
• Economical alternative to coil tubing or slick line rupturing
• Ruptures ceramic disk into small crushable fragments

LENGTH OF GO-DEVIL WILL VARY ACCORDING TO DEPTH AND DEVIATION. GREATER THAN 55˚ DEVIATION DO NOT USE GO-DEVIL DROP BAR.