The “MAGNUM” is a multi-configuration plug used to temporarily isolate multi-stage vertical or horizontal completion operations. The base model of the Magnum Series™ is a ball drop configuration. When combined with three additional on-the-fly inserts (Bridge Plug, Flo-Back, or Flo-Back with Bio-Ball), this tool provides the service company with optimum on-site versatility. Comprised of proprietary composite material and having a low metallic content, the MAGNUM Series™ can be quickly and easily milled and circulated back to surface.

Magnum Ball Drop: After setting, the tool remains open for fluid flow and allows wireline services to continue until the ball drop isolation procedure has started. Once the surface-dropped ball is pumped down and seated in to the inner funnel top of the tool, the operator can pressure up against the plug to achieve isolation.

Magnum Bridge: The Bridge Plug, or “Kill Plug”, has a “top venting” ability, which allows for upper and lower equalization during drill out.

Magnum Flo-Back: When the pressure below the plug is greater than the pressure above, the one-way check valve will allow the two zones to commingle. The operator can independently treat or test each zone and then remove the flo-back plug(s) in one trip with conventional milling or drilling tools.

Magnum Flo-Back with Bio-Ball: Also built with a one-way check valve, this plug temporarily prevents sand from invading the upper zone and eliminates cross-flow problems by utilizing an Aqueous-Soluble Bio-Ball sealer. After the Bio-Ball has been dissolved by pressure, temperature, or fluid, the check valve will allow the two zones to commingle. The operator can then independently treat or test each zone and remove the flo-back plug(s) in an under-balanced environment in one trip.