The Hydraulic Set Liner Hanger with Upper PBR is a diverse liner hanger. It is capable of hanging heavy loads below the packer. The Hydraulic Set Liner Hanger has a large 4” ID Lower Bore that is compatible with most 4-1/2” liner weights. Additionally, the Hydraulic Set Liner Hanger has an Upper PBR (5-1/4” ID) which accepts an accessory Locator Seal Assembly. Maintains a full 4” ID when stung in with the Locator Seal Assembly for Tieback.

The Hydraulic Set Liner Hanger has upper and lower centralizing slips which increases its ability to set in deviated sections of wells. The Hydraulic Set Liner Hanger uses a proven elastomeric element stack. Accessory tools are available with bonded seals or premium seal stacks.

The setting Tools is simple in design for superior reliability and high load rating. With the ball activated setting system, high pressures can be used to circulate fluid while running the liner. The Setting Tool utilizes the 4” ID lower Bore to provide seal integrity between the run-in string and liner top, ensuring circulation out the liner show when running liner.

Before releasing the Setting Tool, both pull testing and pressure testing steps are preformed to ensure that the Hanger/Packer is completely set.