|
Innovation Revealed:
The Dual Magnumdisk™ isolates wellbore reservoir pressure utilizing two dome shaped disks. The Magnumdisks™ are made of a proprietary material which give them incredible strength and durability in a variety of downhole conditions up to 10,000PSI (68.9MPa).The Magnumdisk™ Sub is run on the bottom of the tubing and/or below a production packer BHA. After the production packer is set with Dual Magnumdisks™, the wellbore reservoir is isolated. Once the upper production BHA is run in hole, latched in to the packer, and all tests are performed, the Magnumdisks™ can be knocked-out using a Magnum Go-Devil Drop Bar, coil tubing, slickline, or sand line. Once the disks are removed, the wellbore fluids can then be produced up the production tubing.
Features:
- Economical alternative to profile nipple with a plug
- Eliminates the use of retrievable plugs
- Allows for tubing tests up to 10,000PSI (68.9MPa)
- 400°F (204ºC) rated
- Used to negative test liner top
- Can be run in hostile environments (H2S & CO2)
- Little to no interfering debris left in the wellbore
- Full bore opening after mechanically broken
- Reusable with redressing kit
- Available with premium threads & materials
- Can be run in heavy mud environment
- Maximum surge potential of formation after perforating
- Can be pressure tested previous to installation
- Patent #5924696
*Magnum Oil Tools recommends the use of the Dual Magnumdisk™ for snubbing operations as long as the pressure control company and or operator have procedures in place to secure/control the well in the unlikely event of tool failure.
|
 |
 |
Dual Magnumdisks™ are available with Box x Pin and Box x Muleshoe Connections.
Custom-sized Magnumdisks™ can be manufactured upon request.
*Tool OD Based on P110 Material
 |